Production procedure of steel cage welder

Production procedure of steel cage welder

1. Feeding, put the main reinforcement on the main reinforcement rack, and the disk reinforcement on the stirrup rack.

2. Pass the main rib through the dividing plate through the fixed plate to the moving plate, and fix it on the moving plate.

3. Weld and fix the stirrup and the main reinforcement by cross welding. The stirrup is continuously wrapped twice side by side and welded firmly with the main reinforcement.

4. The two discs rotate synchronously, so that the stirrup is continuously wound on the main rib and welded, while the moving disc moves slowly.

5. Make two side by side loops to weld firmly and cut the stirrup. Then move the cage to separate it from the retaining disc.

6. Loosen the bolts fixing the main bar and the moving plate, and move the steel cage so that it is separated from the moving plate.

7. Move the processed steel cage away from the support frame, drop the support frame into the position, move the plate back to the position, and prepare to produce the next cage.