Maintenance of steel bar winding machine

Maintenance of steel bar winding machine

Before the work of the reinforcement machine every day, the user should do several aspects of check:

1. Check every nut on the winding machine. After all, if there is a problem with the nut, there will be some problems when the machine is told to run. If there is overheating in the process of machine operation, then we must remember to check the motor, of course, this should be rapid, after all, the heat can not be lost in time, the motor is sure to be burned. In the inspection, we should also remember to carry out a check on the reducer, hydraulic oil, etc., not enough to add in time, so as not to avoid normal operation.

2. Before the actual production, it is necessary to press the three emergency stop buttons on the steel cage winding machine to see whether they are in the state of being pressed, and whether the power supply is in the state of being off; Of course, the line of the problem do not forget to check, after all, the line once the problem, the whole machine will be very easy to have problems.

Advice: Even if the new steel cage reinforcement winding machine equipment itself has very excellent operating advantages, but if it is not strictly in accordance with the corresponding technical regulations of scientific operation and maintenance management, it is really difficult to give full play to its own operational efficiency, not to mention reduce the incidence of abnormal failure, so, in order to avoid unnecessary maintenance costs, but also hope that the use of units must pay attention to the management of equipment.