Do a good job of protection of steel bar cage welding machine

Do a good job of protection of steel bar cage welding machine

Steel bar cage welding machine is a kind of steel bar processing tools. Before using the rolling cage welder, all aspects should be checked. Next, introduce the protection work of steel seam welder. Let's have a look at it together.

1. Before the operation of the steel hobbing welder, check whether the electrical circuit is abnormally aging and replace it in time if necessary. Check whether screws and bolts are loose and tighten them in time.

2. Test run should be carried out for 15 minutes before normal operation of the steel bar hob-welder. During the test run, pay attention to check whether each component has abnormal vibration and sound, and check whether each station is in normal working state. After inspection, it can work normally.

3. During the working process of the steel bar welder, the operation condition should be observed in time. If abnormal conditions are found, the machine should be shut down for maintenance, so as not to cause major faults.

4. When the steel bar is used, the cleaning and maintenance work should be done in time, and lubricating oil should be added regularly to the parts that need lubrication to ensure the normal operation of the steel cage welder.

The method of avoiding the fault of the steel numerical control hobbing welding machine:

1, the staff of the steel hobbing welding machine must be trained professionally. Many people operating CNC steel welding machine do not understand the degree of operation and performance of the machine, resulting in operational errors, resulting in serious damage to CNC steel welding machine.

2, before the operation of CNC steel hobbing welding machine, pay attention to check whether each part of the machine is normal, check whether the screws, bolts are loose, check whether the CNC steel hobbing welding machine each mechanism has leakage phenomenon. Any abnormal situation must be reported in time.

3. When operating CNC steel welder, do not exceed the maximum load, because the machine is prone to damage due to excessive load.

4. The wear and tear of steel bar welder is caused by the failure of protection work, so we must regularly maintain numerical control steel bar welder at ordinary times to extend its service life.